background image

06

 Do not run the appliance for more than 3 minutes per time, 

and only wait until the unit is cooled to room temperature 

before performing next operation cycle.

 Turn the Speed Selector to “0” Position once the mixture 

has been blended to your desired consistency.

 Turn the jar by anti-clockwise and remove it from the motor 

unit, carefully take down the jar cover, then pour and serve.

Fig.4

GRINDER OPERATION FOR 
COFFEE BEAN

 Lay the motor unit on the flat horizontal surface and make     

sure it is unplugged.

 Fill the grinding bowl with proper coffee bean, then 

assemble the grinding blade assembly and grinding bowl 

together. Please see Fig.3

 

NOTE: The quantity of coffee bean the grinding bowl 

allows to grind is Max 60g.

 Place the grinder attachment on the motor unit, Turn the 

bowl clockwise until a click will be heard when locked into 

position properly. Please see Fig. 4

 

NOTE: There is a safety interlock device at the bottom of 

Fig.3

Fig.5

bowl, If the bowl is not assembled in place, the chopper will 

not operate.

 Ensure the Speed Selector to “0” Position, then plug into power 

outlet.

 Ensure the Speed Selector to “0” Position, then plug into power 

outlet.

 Select the desired speed setting, the appliance will start 

grinding. During grinding, you can press down the Pulse button 

without releasing it if want to accelerate the process of grinding. 

 Turn the Speed Selector to “0” Position once the coffee has been 

ground to your desired result.

Summary of Contents for KUJB006M













Reviews: