04
Note: Cut all foods into pieces (Sinewless, boneless and fatless
meat is recommended, approximate size :20 mm x 20 mm x 60
mm) so that they fit easily into the hopper opening.
6. The max operation time per time shall not exceed 7 minutes
and minimum 10 minutes rest time must be maintained
between two consecutive cycles.
7. Place a clean container with proper size under lock nut to
receive meat powder come from the appliance.
8.When finish blending, unplug to the power source,Disassemble
the ream meat tube assembly: press down release button
properly with thumb of left hand (see arrow 1 of Fig.3), turn
the ream meat tube assembly clockwise with right hand then
remove them (see arrow 2 of fig.3).
Caution: Ensure that the main machine is unplugged when
disassembling.
REVERSE FUNCTION
1.In case of jamming press the rocker switch to “O”position
.wait at least one minute until ream meat rod has come to a
complete stop.
2.Press the rocker switch to “R”position,Ream meat rod will be
rotating anti-clockwise, and the ream meat tube will get empty.
If the main machine doesn't work,press the rocker “O” and
clean it.
Note: The“R”position max operation time shall not exceed 5S.
CLEANING AND MAINTENANCE
Unplug the power cord before cleaning.
Remove blade, cutter head, lock nut, funnel, screw press
support, connecting ring cookie disc, cookie cup, etc., then
wash them in water.
Caution: The blade is sharp, so handle carefully when
cleaning.
Wipe the outside surface of the main machine with a damp
cloth, then drying thoroughly.
Summary of Contents for KUMG004W
Page 1: ...KUMG004W MEAT GRINDER ...
Page 4: ...02 KNOW YOUR MEAT GRINDER ...
