background image

EZ S
ta

t™

   U

ser
’s & I
nstalla

tion M

anual

15

3.5 Settings

The following settings should be checked and changed as needed:

• 

SET LOGGER TIME FROM PC CLOCK

: Sets the EZ Stat™ 

module’s time to the PC’s time . This sets the EZ Stat's™ internal 
clock so that future data recorded reflects the actual time of day 
the event was logged . This is useful if the data logger battery 
should need to be replaced or your state observes daylight 
savings time .

• 

USING ONSITE SERIES

: The EZ Stat™ can be used on a range of 

Decatur products . These products export data at different baud 
rates . Use this section for trailers or Decatur’s SI units .

• 

USING DECATUR RADAR

: Use this selection when using the EZ 

Stat™ with radar guns for readings .

• 

CLEAR THE LOG

: This selection erases all data from the logger 

device .

3.6  Log File

• 

SAVE TO FILE WHEN READING

: If checked, this function 

saves the information from the logger to the file listed in box 
“filename .” If you forget to check this box before reading from the 
logger device, you can go to the File Menu — Save Logged File, 
to save to your hard drive .

Figure 3.6

Check box to save file .

Summary of Contents for EZ Stat





































Reviews: