background image

EZ S
ta

t™

   U

ser
’s & I
nstalla

tion M

anual

21

3.8.4  Traffic Speed Survey (Any Graph)

• 

PRINT

: Prints the “EZ Stat Traffic Speed Survey” window .

• 

COPY TO CLIPBOARD

: Copy the “EZ Stat Traffic Speed Survey” 

window to the clipboard . You can use this to copy over to a 
graphics program or Microsoft Word or Excel .

3.8.5  Understanding the Charts (Any Graph)

In the top left hand corner of each chart is a summery of 
what the chart is showing . The summery not only shows what 
parameters have been set for the graph (Report Start Date, 
Report End Date, etc .) but also reveals some of the results . 
Most of these are self-explanatory and need no fruther 
discussion . However, the one area that can sometimes be 
confusing is what the percentiles mean . Using Figure 3 .8 .1 as 
an example, the summery shows the 50th percentile at 33 mph 
and the 85th percentile at 83 mph . What this means is that 50% 
of the vehicles were going 33 mph or less and that 85% of the 
vehicles were going 83 mph or less .

3.9  Data Collection

The EZ Stat™ reads vehicle speeds 5 times per second . When a 
moving object is detected by the radar, the logger expects it to 
be present for at least 4 seconds, then receive a zero speed . The 
maximum speed is recorded with the timestamp in the memory of 
the logger module . 

NOTE: The EZ Stat™ will not create a record if another car is in range 
of the radar before the first one passes beyond the antenna . When 
traffic is heavy, there will be no gap (zero speed) in speed readings, 
and the EZ Stat™ will see the whole cluster of cars as one event . 

Summary of Contents for EZ Stat





































Reviews: