GENESIS-II DIRECTIONAL
™
USER’S AND INSTALLATION MANUAL
31
Rev. 02/05
3.9 Stopwatch Operational Mode
You can use the Genesis-II Directional to calculate
target speeds without transmitting radar by using the
stopwatch mode. The stopwatch mode relys on the
time / distance formula to calculate target speeds by
measuring the amount of time a vehicle takes to travel a
known distance.
SPEED = DISTANCE
TIME
To place the radar into stopwatch mode, first ensure
that no antenna is currently selected, then press and
hold the OPTN button for two seconds. The MODE
window should display “StpW” to indicate you have
activated the stopwatch functions.
Figure 3-9a The Mode Window will display “StpW” whenever the
Genesis-II Directional is operating in the Stopwatch Mode.
The three numeric windows are used to display time,
distance, and speed.
TARGET WINDOW:
Calculated Speed in Km/H
LOCKED WINDOW:
Time in Tenths of Seconds
PATROL WINDOW:
Distance in Yards
Example:
60 Km/H
150 Tenth Second Increments (15.0 Seconds)
440 Yards
Summary of Contents for GENESIS-II DIRECTIONAL
