background image

G

enesis II S

elec

t

  

U

ser
’s

 & Installa

tion Ma

nual

16/September/2015

6

Welcome to Decatur Electronics, Inc.

Thank you for choosing the Decatur Electronics Genesis II Select™ — 

A highly advanced traffic radar unit that will reward your department 

with years of dependable service. The Genesis II Select™ design 

incorporates high performance and long range, with many leading 

features. We urge you to study this manual before using the Genesis II 

Select™, so you can maximize the benefits of this sophisticated radar 

device. We believe you will be pleasantly surprised by the features 

and advantages. 

The Genesis II Select™ is small, dependable, features instant target 

acquisition. If you are as pleased with its performance as we think 

you will be, ask your Decatur sales representative about other 

Decatur products including the Genesis™ line of radars, the Onsite™ 

line of speed trailers, dollies, and pole signs and the Responder™ line 

of in-car video systems.

Traffic officers told us exactly what they wanted in a radar device - 

and we built it. Try any one of our products and see if you don't agree 

that it is the best-in-class!

—The Management and Staff at Decatur Electronics, 

Summary of Contents for Genesis II Select









































































Reviews: