GENESIS-VPD™ USER’S MANUAL
12
Rev. 09/04
PWR
The
PWR
button turns the
Genesis-VPD
on and
off. If you press
SEL
while pressing power, the
settings come up with the factory defaults.
2.3 Display
2.3.1 Number Segments
Three large digits
(888)
display the vehicle speed.
The small digits on the right display either the
locked speed or Faster target speeds.
2.3.2 Status Indicator Icons
The following icons can appear at the top or
bottom of the display screen and describe the
following conditions:
Figure 2.3.2 Number segments and status indicators
POWER
When
POWER
appears, the power is on.
RFI
The radio frequency interference
(RFI)
icon
indicates that excess RFI energy is present. The
radar automatically inhibits all speed
measurements. No new speeds display or
transmit via the serial port while this icon is
active, and if the system is displaying a locked
speed, the speed will remain locked. When the
RFI condition no longer exists, the system will
resume normal operation. Possible causes of
this condition are the patrol vehicle’s FM