GENESIS-VPD™ USER’S MANUAL
15
Rev. 09/04
3. Operating Modes
The
MENU
button on the
Genesis-VPD
control panel lets
you review and change programmable options. The options
are in two menus: primary and secondary. When you finish
making your selection(s), release the buttons, and your
new settings will be in effect. The radar gun will remember
the settings you last set when it is turned off and will power
up with them.
•
If you press and hold the SEL button when powering up the unit,
the system will restore the factory default settings.
•
The
Genesis-VPD
will exit menu mode if you do not press the
MENU or SEL buttons after two seconds. If you press and hold
either the MENU or SEL buttons, the
Genesis-VPD
will remain
in menu mode.
3.1 Primary Menu
You can use the factory default settings listed on the
next page or set your own. To select a setting,
repeatedly press the
MENU
button until the setting you
want to change appears. Then press the select
(SEL)
button to advance through that setting’s options. When
you have made your selection, release the buttons, and
your new settings will be in effect. If neither
MENU
or
SEL
is pressed after 2 seconds, the radar gun will
return to normal operating mode.