GENESIS-VPD™ USER’S MANUAL
17
Rev. 09/04
Direction (dir)
Direction lets you select the direction of the vehicle you
want to display. The
dir
default value
t A
indicates that
you are monitoring vehicles moving both toward and
away from the radar gun.
Backlight (bL)
This turns on and off the LCD backlight.
bL ON
is the
default setting. To change this option to
OFF,
press the
MENU
then the select
(SEL)
button.
Audio (Aud)
The Audio setting controls the volume level of the
Doppler tone. Press
MENU,
then press
SEL
to toggle
through the volume level settings from
0
to
6 (
0
is off,
and
6
is the highest volume level
.)
It is the
manufacturer’s suggestion to never leave the audio
setting on 0 as the audio doppler is part of the officer’s
tracking history requirement.
Sensitivity Level (SEn)
The
SEn
option lets you control the maximum
target-acquisition range.
SEn
levels range from
0
through
5 (0
is off,
1
is the minimum range, and
5
is the
maximum range.) You will normally want to start with
the maximum range and decrease it until you attain
the desired performance level.
Squelch (SLh)
The squelch determines the type of Doppler audio you
want the radar gun to send out. When squelch is on,
the sound is only the Doppler tone for the displayed
target. When squelch is off, you will hear all Doppler
tones, including other vehicles, interference, and any
noise the antenna receives.
3.2 Secondary Menu
You can use the factory default settings listed below or
set your own. To select the secondary menu
settings, press and hold the select
(SEL)
button, then