GENESIS-VPD™ USER’S MANUAL
7
Rev. 09/04
Figure 1.1.1 Insert the batteries into the handle grip.
Push the batteries into the receptacles in the
bottom of the handle until you hear them snap into
place.
1.1.2 Control Panel Functions
The factory default settings for the control panel
are
Default
dir
Direction
t A
bL
Backlight
On
Aud
Audio volume
3
SEn
Sensitivity
5
SLh
Squelch
On
See section 3 Operating Modes for more on the
settings and how to change the default settings.
1.2 Trigger Operation
The
Genesis-VPD
transmits and receives microwave
energy when you pull the trigger. When you want to
lock onto a speed, release trigger, then pull it again
within 1/2 second.
1
The speed in the left window will
move to the right window and flash alternately between
it and a directional indicator (
t
means the target
vehicle is moving toward you, and
A
means away.) The
locked speed clears when you pull the trigger again.
1
You can request Trigger Release Lock software that works another
way. When you release the pulled trigger, the target speed locks and
displays in the
LOCKED
window.