Operations Manual
PCCOM PCI 8 port universal RS232 card
DECISION Computer International
36
APPENDIX G
O
O
S
S
/
/
2
2
C
C
O
O
N
N
F
F
I
I
G
G
U
U
R
R
A
A
T
T
I
I
O
O
N
N
Under OS/2 2.x and OS/2 Warp operating system, the PCCOM
device driver provides total 96 ports and baud rate up to 115200.
PCCOM also supports device driver for high speed card, and the
baud rate can be up to 1M. The device driver works for 8250,
16450, 16550 (FIFO), 16850(FIFO) etc.
G.1 Installation
The installation procedures are shown in the following.
1.
Add command into CONFIG.SYS file then reboot.
DEVICE=C:\PCCOM8PC.SYS[/Cxx] [/Syy] [/4]
•
xx Assign the first port name (1 to 92)
•
yy The switch used to set PCI card number
•
4 High speed card used only
If "/C" is not use, the first port is COM3.
If you only install one card, you can ignore /S parameters.
If you install more than one card, you must set different card
number. (Please refer chapter 5)
Switch: Set card number
