Network Information
Controller LU Name
The name assigned to this controller at the AS/400 system
location. It should match the
Remote Location Name
defined
in the
AS/400 R
EMOTE
W
ORKSTATIONS
C
ONTROLLER
attributes
.
Valid characters are @,#,$,&, 0-9, A-Z (Upper case) up to 8
characters
Controller CP Name
The Control Point Name depends on whether the Advanced
Program to Program communication controller (APPC) and
the Remote Workstation Controller (RWS) are defined as the
same AS/400 system. If the APPC and the RWS are defined
from the same system, the CP name is one and the same, if
not , the CP name differs from the LU name
Valid characters are @,#,$,&, 0-9, A-Z (Upper case) up to 8
characters.
Default Mode Name
The name used when the Mode name of the AS/400 System
is not defined. The entry must be identical to a mode
description name in the AS/400.
The default mode name is QRMTWSC
Valid characters are @,#,$,&, 0-9, A-Z (Upper case) up to 8
characters.
Logical Connection
Retry Counter
The number of times the Controller should retry to establish
connection with the AS/400 system after connection failure.
Enter a value from 0 - 254, or 255 for UNLIMITED retries.
The default value is 10 retries]
Logical Connection
Retry Interval
The time lapse between retries to establish connection. Enter
a value in the range 0 (0 seconds) to 60 (ten minutes).
The default value is 6 (1 minute)
3
Summary of Contents for 3000 Series
Page 1: ...Series 3000 STK3494 3494 User s Manual ...
Page 2: ......
