SNMP Management
10.1.1Essential Parameters Configuration
SNMP Configuration
Activate SNMP
Agent
Functionality
Allows full device control and monitoring.
Y (1) = Activate to obtain full monitoring and control of device.
N (0) = Don't activate. The device cannot be managed. The
manager is aware of its existence but it cannot monitor or control it.
IP Address
A unique Internet Address (IP). The
IP
Address
of this UDP/IP board,
must be different from the IP address of any host that is connected to
the TCP/IP network. The address consists of a 15 numeric character
string divided into four groups of up to three characters each; the
groups are separated from each other by a dot.
The four groups represent the four octaves of binary numbers that
make up the IP address--the binary form being translated to decimal
form. Each group consists of a decimal number valued between
[000] and [255] that complies with the
Class
restrictions.
Subnet Mask
Subnetting
is an addressing system that further divides the
hostid
part
of the IP address into a
physical subnet
part an a
host
address part.
This is a hierarchical addressing method in which one network
address is used for several physical network addresses.
netid
hostid
netid
subnet
id
host
id
Wherever
Subnetting
is used,
Subnet-masking
must also be used.
Define the
net
and
subnet
IDs of the slot LAN, by setting bits in the
netid and
subnet
id
part as '1,' and those in the host address part as
'0,'
subnet masking
can reveal whether two hosts actually belong to
the same physical network.
Number of IP
Gateways
This number is usually "0" unless the manager is in another LAN and
must be accessed via a router.
3
Summary of Contents for 3000 Series
Page 1: ...Series 3000 STK3494 3494 User s Manual ...
Page 2: ......
