Error Identification
0017 To recover - press the
ERROR RESET
key. Enter data to the end of the field
or move the cursor to the start of the field and use
0018 Key Used to exit this field not valid
0019
DUP
or
FIELD-MARK
keys not permitted in this field
0020 Function key not valid for right adjust field
0021 Data must be entered in this field.
0022 Status of field not known
0023 Hex Mode - Entry not valid
0024 Decimal Field - Entry Not Valid
0026 F-Key Entry Not Valid
0027 The key pressed is undefined and therefore cannot be used.
0029 Diacritic Character not valid.
0031 Data Buffer overflow
0032 MSR data error
0033 MSR data received was secured and this field was not specified for secured
data.
0034 MSR data exceeds length of field. Data received from card exceeds length of
field.
0035 MSR Error. Card incorrectly inserted or damaged.
0036 Cursor Select not allowed in field-exit required state.
0037 This is a non-selectable field - you've pressed cursor select.
0038 Light Pen and MSR Use Not Allowed.
0040 to 005F Communication Network Errors
0042R
eceive
Clock
Failure
This
error
indicat
es that
the
receiv
e
clock
signal
becam
e
inactiv
e
during
Modem or DCE is not ready or not functioning properly. Data Set Ready (DSR) Line
Inactive (Model 01); DCE Not Ready (Model 02)
This error indicates that the modem or DCE was not ready during required intervals of
normal operation. The operating state of the modem or DCE is checked at different times,
depending on the specific link-level protocol in use.
A-
8
Summary of Contents for 3000 Series
Page 1: ...Series 3000 STK3494 3494 User s Manual ...
Page 2: ......
