- 19 -
6.3.
Operation procedures:
6.3.1.
AUTO ON/OFF:
The system turns on when any key is pressed or when it sensors an input
from the speed sensor.
The system turns off automatically when the speed has no signal input or if
no key is pressed for approximately 4 minutes.
6.3.2.
RESET:
The unit can be reset by either changing battery or pressing the mode key for
3 seconds or by pressing the RESET-key.
6.3.3.
MODE:
You can choose to
SCAN
or to
LOCK
the data shown on the display.
If you do not want the scan mode, press the
MODE
key. The pointer will move
from one function to the next function after each press. The function besides
the blinking pointer is selected.
6.4.
Display functions:
6.4.1.
TIME:
Press the MODE key until the pointer locks on to TIME.
The total working time will be shown when starting the exercise.
The total working time of the previous workout is always memorized. The time
of the new workout will be added to the previous total working time.
6.4.2.
COUNT:
Press the MODE key until the pointer locks on to COUNT.
The display automatically accumulates the workout count when starting the
exercise.
The count of the previous workout is always memorized. The count of the new
workout will be added to the previous count.
