34
Noise/vibration information
Information about sounds and vibrations
The values stated above are noise emission values and are therefore
not necessarily reliable workplace values. From the interrelation-
ship between emission and immission levels it cannot be reliably
concluded whether additional precautions are needed or not. Fac-
tors with a potential influence on the immission level at the specific
workplace include the specifications of the work area and surround-
ing area, the duration of exposure, other sources of noise, etc. You
should also take account of possible deviations in national regula-
tions with respect to permissible workplace values. However, the
information referred to above does enable the user to make a better
assessment of the dangers and risks involved.
• Vibration value a
h
: < 2.5 m/s
2
• Uncertainty K: 1.5 m/s
2
IMPORTANT!
The vibration emission level (vibration value) quoted above was
measured in accordance with a standardized method set out in
EN 60745-1 and EN 50580 and can be used to compare one electric
tool with another. It can also be used for a provisional assessment of
the level of exposure. The actual vibration value can differ with the
type of use as explained below:
• condition of the fine paint sprayer or its correct maintenance;
• the type of material and use of the fine paint sprayer;
• use of the correct accessory and its perfect condition;
• the user’s firm hold of the fine paint sprayer;
• proper use of the fine paint sprayer as described in these operat-
ing instructions.
Inappropriate use of the fine paint sprayer can cause vibration-in-
duced ailments.
Layout_DS_FSS_500_EX_UK_SPK7.indd 34
Layout_DS_FSS_500_EX_UK_SPK7.indd 34
19.11.2020 15:15:29
19.11.2020 15:15:29
