2
Appearance
Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, two external antennas port, a SIM card slot, a power slot,
and a Reset button.
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup
or WPS in progress.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading firmware.
Solid Green:
Deco is all set up and
connected to 4G / WAN.
Solid White:
Deco is all set up and
connected to 5G.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
1 Gigabit Ethernet Port:
For connecting to your modem, the Ethernet outlet, or for other internet services.
N
ote: All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time.
2.5 Gigabit Ethernet Port:
For connecting to your modem, the Ethernet outlet, or for other internet services.
N
ote: All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time.
Power Slot:
For connecting Deco to the power socket via the provided power adapter.
Note: Make sure you have installed two external antennas to ensure that Deco's 5G network works properly.
5G/4G/3G External Antennas:
For connecting external antennas (not included in the package) to your Deco.
Reset Button:
Press for 1 second and release to reset Deco to
factory default settings. The light changing from
pulsing yellow to solid yellow indicates a successful reset.
SIM Card Slot:
For inserting a Nano SIM card (not included in the
package) to Deco.
