5
®
Make sure that the wall cut-out and supports left and right below the base plate of your custom-made
fireplace are perfectly in level (both horizontally and vertically), and all the corners of the cut-out are in
a perfect 90 degree angle. For the specific dimensions, please refer to the detailed technical drawing
of your Decoflame fireplace.
If in doubt, please contact Decoflame.
If your fireplace is installed in a room with a wooden ceiling, you must ensure that the distance between
the top of the fireplace and the ceiling is at least 1 meter. when choosing a suitable height as position
for your fireplace, please also consider keeping it out of reach of smaller children and pets.
when lit, the surfaces of the upper part of the fireplace, as well as any glass screens will be warm, as
the heat is led upwards and outwards.
Do you have children or pets in the home? If so, make sure an adult keeps an eye on them at all times
during operation of your fireplace and never leave your fireplace unattended when it is lit.
Before starting to clean the fireplace, make sure it has cooled down and it is switched off completely.
Any glass components of your custom-made Decoflame fireplace are made of tempered heat-resistant
glass. Those glass parts as well as any metal parts which are exposed to the heat of the fire might
slightly change colour or structure. This is to be considered normal wear and tear and does not consti-
tute a product flaw or fault.
we recommend that, if needed, you clean all parts of your fireplace with a lint-free cloth or kitchen
paper towel and a non-abrasive detergent, some bioethanol or another alcohol-based product. Re-
garding polished steel surfaces use only a soft and clean cloth as the surfaces will easily be scratched
by e.g. paper towels.
Should you wish to clean the flame tray, please avoid contact with the filament, as this delicate compo-
nent can be easily damaged.
Please refer and adhere to the detailed installation guide on your technical drawing, which has been
generated for your specific custom-made Decoflame fireplace. You will find all dimensions and a step-
by-step installation instructions there. It is advisable to install your Decoflame fireplace only once all
decoration work in the room has been finished.
walls surrounding the built-in bioethanol fireplace must be constructed of, or at least covered with
non-flammable material like fibre plasterboards (e.g. Fermacell, GypRock FireLine) or bricks.
The supports to the left and right inside the cut-out on which the fireplace will rest must be made of
sturdy, non-flammable material like metal, concrete or brick. The supports must be perfectly in level –
both horizontally and vertically.
If you have the slightest doubt of how to install the fireplace and which screws to use for your type of
wall, you should contact a skilled craftsman who is able to carry out the installation correctly.
3. MAINTENANCE
4. INSTALLATION
