60
6
6.
Settings the Parameters
The settings of the features and characteristics of the E-Drive PLUS can be changed as follows to suit
the usage.
You can modify two sets of parameters: “driving parameters” and “function parameters”.
The driving parameters allow you to set such settings as the maximum speed of the wheelchair,
acceleration, and joystick sensitivity. You can configure each item in detail using the “Free Mode”,
or select one of the preset modes: “Soft Mode”, “Standard Mode” and “Sports Mode”.
The function parameters allow you to set the time lapse for auto power off, the buzzer sound,
the LCD brightness, and so on.
6.1. Operation
Overview
(1)
Driving Parameters ~Preset Mode~
You can selec t and use the “Sof t Mode”, “Standard Mode”, or “Spor ts Mode” which are
pre-configured at the time of shipping from the factory.
Start
Select “Soft Mode”, “Standard Mode”, or “Sports Mode”
Write
End
(2)
Driving Parameters ~Free Mode~
You can fine-tune the speed, acceleration and joystick sensitivity.
Start
Select “Free Mode”
Set speed for advancing forward
Set speed for reversing backward
Set speed for turning
Set straight-line acceleration
Set straight-line deceleration
Set acceleration/deceleration when turning