64
6
Purpose of Operation
Operation Method
Parameter Status during Operation
and Its Meaning
[3]
[Preset Mode Pattern
Selection]
Select one from “Soft
Mode”, “Standard Mode”,
and “Sports Mode”.
Speed switch
The currently selected mode blinks.
Flip the speed switch up (or down)
to select the “Soft Mode”, “Standard
Mode”, or “Sports Mode”.
Soft Mode
Standard Mode
Sports Mode
Free Mode
Proceed to ne
xt
Bac
k to pre
vious
Briefly tilt forward
once.
Briefly tilt toward
you once.
[4]
[Write]
Write the selected settings
to memory.
Speed switch
Hold down the speed switch for 2
seconds (until the buzzer beeps).
At this time, you will hear a long
buzzer.
Once the buzzer beeps, release
your hand from the switch.
The settings are saved.
If you turn off the power without
performing this operation, the
settings will not be changed.
Writing timing indication
Writing complete
[5]
[Restart]
Use the wheelchair with the
saved settings.
Turn off the power, and then turn it
back on. You will hear a short
buzzer.
This is the same as when the power
is normally turned on.
You can now use the wheelchair with
the modified settings.