Mounting set
LBM7013, LBM7113, LBM7213
__________________________________________________________________________________
__________________________________________________________________________________
Sida 4/9
3. Assembly and adjustment of adaptor
First mount the adapter plate (F), spacer
adapter plate (G & H), washer adapter
plate (I). The kit includes 2 of each type of
distance adapter plates/side, front and rear
type. This is to enable the correct
placement of the adapters (F). Use a total
of 3 pcs/side.
This is kept into place using screws (J) that
is tightened on the outside of the frame
using spring washer (K) and domed nut (L).
Tighten the domed nut (L) loosely at this
point so that the complete assembly can
be moved along the frame of the wheelchair.
Now mount the adapter bar (D) bracket in the
adapter plate (F) using the screws (M).
Assemble both sides.
WARNING!
When assembly on wheelchair one support point
must always be in front of the wheelchairs brake.
J
K L
