User Manual Floormate
– V. 2.6 B/C
- 11 -
4. Putting into operation
Remove the Floormate from the transportation stand in accordance with the directions as
indicated on the images below.
1. Pull to release the handlebar.
2. Place push bar into upright position and click into red bar.
Drive the Floormate ( tilted backwards ) in the transportation position to the location
where you would like to use it.
Then connect the supplied power cable.
First connect the power cable with the blue connector on the DecoRad® Floormate as
indicated on the images below.
ATTENTION: make sure the power cable connector is firmly connected to the blue
machine outlet !
