DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 17 of 25
4.3
Supported RS-485 and IR Commands
EJECT
This button functions exactly as the front panel EJECT Button: The EJECT
Button allows the user to eject the DVD. Pressing the EJECT Button will allow
the user to gently pull the DVD out of the mechanism.
SETUP
The SETUP Button toggles display of the Setup Menu, which allows the user to
access or modify various settings. Use the navigation buttons to advance
through the available settings:
GENERAL SETUP
-
ANGLE MARK:
Can be turned on or off. When this feature is turned on, an
ANGLE MARK display appears on the screen for scenes that were shot at
different angles.
-
OSD LANGUAGE:
Select the language that the OSD setup screens are
displayed in.
SPEAKER SETUP
-
DOWNMIX:
Selects the DOWNMIX of the audio outputs. The following
settings are available:
Lt / Rt
–
Switch downmix to 4 channel output.
Stereo –
Switch downmix to 2 channel output.
Off –
Disable downmix.
-
CENTER:
Turn CENTER SPEAKER on/off
-
REAR:
Turn REAR SPEAKERS on/off
-
SUBWOOFER:
Turn SUBWOOFER on/off
-
CENTER DELAY:
Adjust the speaker’s CENTER DELAY.
-
REAR DELAY:
Adjust the speaker’s REAR DELAY.
-
BASS:
Turn BASS BOAST on/off.
AUDIO SETUP
-
OP MODE:
Sets audio compression level.
LINE OUT
–
Normal audio compression. Allows scaling of compression.
RF REMOD
–
Heavy COMPRESSION Setting. No scaling allowed.
-
COMPRESSION:
Sets the COMPRESSION Level when in LINE OUT OP
Mode.
-
PRO LOGIC:
Enables / disables PRO LOGIC Mode.
PLAY MODE SELECTION
-
SHUFFLE:
Turns SHUFFLE Mode on/off.
-
REPEAT:
Turns REPEAT Mode on/off.
-
SCAN:
Turns SCAN Mode on/off.
