DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 1 of 25
Document Revision History
Rev. Level
Date
Description
IR
11/2006
Initial Release
A
02/2008 Updated Outline Drawings corrected -2 connector mating part #
Updated logo, website, & company name change
Corrected Table of Illustrations & Table of Contents
Added cover bezel information
Replaced 2.4.1 & 2.4.2 Block Diagram images with correct ones
Added Fahrenheit to 3.3.11 and to 3.7.1 Electrical Table
Corrected 3.7.1 Electrical Power Requirements
Corrected Outline Numbers for 3.4.5, 3.4.5, 3.7.4, 4.3, 7.1
Added missing 7.0 Reference Drawing
Corrected dimensions for 6.0 Specifications Table
Changed Pinout # 3 Description from “No Connect” to “Reserved”
Corrected grammatical errors
B
06/2009 Added recommendation to terminate unused outputs with a 75-
ohm load, Section 3.4.4
Added recommendation to use EMI hood, Sections 3.4.4 & 3.8
Updated bonding strap requirement, Section 3.4.4
Updated wiring specification for digital audio to show
recommended cable impedance, Section 3.4.5
Separated Instructions for
Continued Airworthiness
&
Troubleshooting
, Sections 5.0 & 6.0
Included
Environmental Qualification Data
, Section 9.0
Reference Documents
(or latest revision)
Document #
Description
525859 Rev IR1
DVD-9101-201-x Outline Drawing
Service Bulletin List
Service
Bulletin #
Subject
Manual
Revision
Revision
Date
Table of Illustrations
Section #
Description
Page #
2.4
Typical System Block Diagram
5
4.1
Front Panel Controls
13
7.0
Reference Drawings
23-24
INFORMATION NOTICE: Despite any other copyright notice, this document and information disclosed
herein contains confidential, proprietary designs owned by DeCrane Aerospace Audio International.
Neither this document nor the data contained herein shall be reproduced, used, or disclosed to anyone
without the written authorization of DeCrane Aerospace Audio International.
