DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 22 of 25
6.2
Troubleshooting Chart
Problem
Possible Cause
Solution
No picture
Unit is improperly installed
No disc in source unit
No power to monitor
•
28 VDC power and video input
is present
•
Insert DVD in source unit
•
Apply power to monitor
No sound
Unit is improperly installed
Audio system not powered
or active
Volume too low
•
28 VDC power and audio input
is present
•
Verify audio system is in active mode
•
Increase volume to acceptable level
Playback not
functioning
Disc not in the unit
Disc upside down or not
aligned in guide
Incompatible disc in unit
Dirty disc
Parental lock activated
Menu on the monitor
•
Insert a disc
•
Reposition disc
•
Replace disc with compatible one
•
Clean the disc
•
Change or cancel parental lock feature
•
Exit the current menu
No power
Circuit breaker has opened
•
Reset circuit breaker
Poor video
quality
Poor DVD quality
Noise being introduced into
system
•
Replace DVD
•
Move source equipment closer to
monitor or distribution modules
Buttons not
operating
Moisture may have
condensed inside unit.
•
Allow unit to warm to room temperature
and moisture has evaporated.
DVD disc not
loading
Foreign object in disc slot
•
Remove foreign object
7.0
Specifications
Physical Specifications—Base Unit
Housing
Anodized Aluminum
Weight
Approx. 2.64 lb / 1.2 kg
Dimensions*
(l x w x h)
6.83" x 6.00" x 2.09"
17.35 cm x 15.24 cm x 5.30 cm
* Dimensions provided are for the base unit, DVD-9101-201-x.
They do not include cover bezel information.
