DeCrane Aerospace Audio International, Inc.
LCDP-9084-301-x Installation Manual
Document # 540344, Rev A1, 02/2009
Page 12 of 16
B. Open pre-moistened pad and gently wipe evenly across display
glass. Do not allow solution to “pool” or puddle around display
edges.
C. Immediately dry display using the absorbent, lint-free cloth.
Gently wipe display to a dry, clear finish.
6.2
General Troubleshooting Procedures
•
Verify power to the unit by rech28 VDC power is applied to the
proper pins on the unit. Use a voltmeter to verify correct level.
•
Remove power from the unit for at least one (1) minute and reapply
power.
•
Recheck all connections to the unit for security. Check all harness runs
for possible pinching. Recheck all pinouts for application accuracy.
6.3 Troubleshooting Chart
Problem
Possible Cause
Solution
Poor picture quality or
scrambled video
LCD backlight malfunction
Poor video source
•
Contact DAAI
•
Change source
Blank screen*
LCD not receiving power
Mother board malfunctioning
•
Check all cable
connections
•
Contact DAAI
* Note: The monitor displays a black screen with the unit turned on and no video signal.
7.0 Specifications
Physical Specifications – LCDP-9084-301-x
Housing
Black Anodized Aluminum
(with stainless steel skeleton)
Screen Size
8.4" (21.34 cm) diagonal
Weight
3.5lb/1.59kg
Dimensions
(l x w x h)
13.32" x 1.13" x 14.59"
33.83 cm x 2.87 cm x 37.06 cm
