O W N E R S M A N U A L
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
Power Draw
Each Zen TORII Mono amplifier will draw between 1.2 and 1.6 amps from the wall
outlet. (150 ~175 watts) The actual amount depends on how high the tubes are
biased, as higher biased tubes draw more current.
3) Speaker Connections
There are 4 gold binding posts located at the rear of each amplifier for hooking up
your speakers. The bottom of these jacks are color coded. The black one should be
connected to the negative speaker wire. There are three red jacks. Use the first one
(next to the black) if your speakers are 4 ohms. Use the second one if your speakers
are 8 ohms or use the third one if your speakers are 16 ohms.
These are industry standard 5 way binding posts that accept bare wire up to 8 AWG,
spade connectors or banana jacks.
MAKE SURE A LOUDSPEAKER IS CONNECTED TO THE AMPLIFIER AT ALL TIMES.
DO NOT OPERATE THE AMPLIFIER WITHOUT A WORKING LOUDSPEAKER
CONNECTED AS DAMAGE MAY RESULT.
4 ohm
8 ohm
16 ohm
Neg
