manualshive.com logo in svg

Dedicated Micros DV-IP NV4, Installation Manual

The Dedicated Micros DV-IP NV4 is a cutting-edge surveillance solution for businesses, offering advanced features for superior security. Ensure a hassle-free installation with the comprehensive Installation Manual, available for free download from 88.208.23.73:8080. Maximize the potential of your DV-IP NV4 with this detailed manual, providing valuable insights and step-by-step instructions.

Share
Download
background image

242

NV4

Index

About ............................................................................ 37
Accessing the Configuration Webpages ...................... 22
Accessing the menus on a local monitor ..................... 21
Accessing the menus on a PC web browser ............... 21
Activate New Feature ................................................. 152
Activity Grid Menu ...................................................... 206
Activity Search Menu ................................................. 204
Activity Setup ............................................................. 127
Advanced ..................................................................... 64
Advanced Record ...................................................... 102
Alarm & Relay Pin Outs ............................................. 222
Alarm Response ........................................................ 125
Alarms and relays ........................................................ 11
Alarm Settings .................................................................115
Alarm Status ................................................................ 36
Analytics Configuration .............................................. 155
Analytics & Third Party IP Cameras ........................... 150
ANPR ......................................................................... 162
ANPR Plate DB .......................................................... 164
Appendix A - Closed IP Configuration Scenarios ..............................217
Appendix B - Pinouts ................................................. 222
Appendix C- Remote Control Codes .......................... 223
Appendix D - User Activity Logging ............................ 225
Appendix E - Locate IP Address (Serial)  .................... 226
Appendix F - Videolan VLC ........................................ 227
Appendix G - Third Party IP Camera ......................... 228
Appendix H - Monitor Output ..................................... 229
Appendix I - Status Pages ......................................... 230
Appendix J - Unit Specification .................................. 240
Archive ....................................................................... 170
Archive Selection ....................................................... 207
Attributes ...................................................................... 31
Audio ............................................................................ 45
Before you start .............................................................. 8
Both types .................................................................... 86
Camconfig Details ...................................................... 234
Camera Configuration .................................................. 43
Camera Lens Configuration ......................................... 87
Camera Overview ...................................................... 238
Camera Settings .......................................................... 82
Camera Settings ........................................................ 183
Camera Upgrade ......................................................... 89
Capabilities ................................................................ 235
Change Scale ............................................................ 199
Check the contents of the box ....................................... 8
Choosing a location for installation ................................ 8
Closed IPTV ................................................................. 19
Closed IPTV  ................................................................ 57
Closed IPTV Camera Allocation ................................... 19
Closed IPTV system mixed with analogue cameras .. 217
Configuration Mode ...................................................... 22
Configuring Closed IPTV ............................................. 22
Configuring Closed IPTV ............................................. 57
Configuring the Unit ..................................................... 21
Configuring Your PC for the Videolan VLC Player ..... 227
Console Settings .......................................................... 66
Copy Menu  ................................................................ 209
Count Status .............................................................. 161
Data ............................................................................. 10
Data ............................................................................. 11
Default .......................................................................... 98

Default DNS Address ................................................... 21
Discover ....................................................................... 62
Display ......................................................................... 75
DM/KBC1 Keyboard ................................................... 213
Dome Menu Option .................................................... 196
Electrical Connections ................................................... 9
Email .......................................................................... 141
Entering Alpha-Numeric Data via a Local Monitor ....... 29
Event Copy and Search Menu ................................... 201
Event List ................................................................... 200
Event Search ............................................................. 186
Event Search Results ................................................ 187
Event Settings ............................................................ 185
Example of On-Screen Alert Message ....................... 166
Extended Cascading of a Closed IPTV System ......... 221
Feature Mapping Page .............................................. 154
Features ......................................................................... 4
Features  ...................................................................... 47
Features & Text .......................................................... 149
Filter Search Menu ..................................................... 202
Firewall ....................................................................... 147
Firewall Access by IP ................................................. 148
Front Panel connections .............................................. 10
FTP Download ........................................................... 145
Gb Network ................................................................ 135
General Information ................................................... 230
Global Actions ............................................................ 131
Help Videos ................................................................ 212
Holiday & Weekend.................................................... 114
Important Safeguards .................................................... 6
Inputs ...............................................................................116
Installation .................................................................... 10
Installing An Advanced Feature License ....................... 151
Installing the NV4 Unit ................................................. 12
Installing the Unit ........................................................... 8
Intelligent PTZ .............................................................. 93
Introduction .................................................................... 3
IP Camera .................................................................... 85
IP Camera Configuration.............................................. 91
IP Network Load......................................................... 239
IP Stream Inputs ............................................................... 90
JPEG Pre Trigger ........................................................... 104
Keyword ..................................................................... 169
Language ..................................................................... 39
Live Transmissions .................................................... 137
Locating and Changing Username/Password Details 
 for Third Party IP Cameras via an FTP Connection .. 228
Locating the Unit IP address ........................................ 21
 Locating the unit IP address using the serial port ..... 226
Logs ............................................................................. 38
Main Menu ................................................................... 25
Maintain ....................................................................... 54
Map Data ..................................................................... 79
Map Options ............................................................... 193
Maps ............................................................................ 77
Masked Cam Det ....................................................... 123
Mono/Colour Camera ................................................... 83
Multicast Setup .......................................................... 139
Navigating The Configuration Menus ........................... 27
Network ........................................................................ 49

Intelligent Security & Fire Ltd

Summary of Contents for DV-IP NV4





















































































































































































































































Reviews:

No comments

Related manuals for DV-IP NV4

Navitel R400 Instruction Manual preview
R400
Brand: Navitel Pages: 25
Elmo EDR-X116 Specifications preview
EDR-X116
Brand: Elmo Pages: 2
Q-See QT428-833 Quick Installation Manual preview
QT428-833
Brand: Q-See Pages: 13
Foscam WS-7004 User'S Installation And Operation Manual preview
WS-7004
Brand: Foscam Pages: 62
XVision XPR16P Quick Manual preview
XPR16P
Brand: XVision Pages: 12
Partizan ADM-44U User Manual preview
ADM-44U
Brand: Partizan Pages: 82
iCatch RAS-413-C Quick Start Manual preview
RAS-413-C
Brand: iCatch Pages: 8
Infinite Play TINF6 Quick Installation & Operation Manual preview
TINF6
Brand: Infinite Play Pages: 8
Digital Watchdog MAX User Manual preview
MAX
Brand: Digital Watchdog Pages: 60
Sony HDR-MV1 Operating Manual preview
HDR-MV1
Brand: Sony Pages: 2
Sony HDR-MV1 Specifications preview
HDR-MV1
Brand: Sony Pages: 3
Sony Handycam HDR-SR12 Specifications preview
Handycam HDR-SR12
Brand: Sony Pages: 2
Sony HDW-2000 Brochure preview
HDW-2000
Brand: Sony Pages: 12
Sony HANDYCAM DCR-DVD650 Manual preview
HANDYCAM DCR-DVD650
Brand: Sony Pages: 2
Sony Handycam HDR-CX330 Operating Manual preview
Handycam HDR-CX330
Brand: Sony Pages: 32
Sony DVCAM DSR-60 Brochure & Specs preview
DVCAM DSR-60
Brand: Sony Pages: 8
Sony GV-200 - Video Walkman Operating Instructions Manual preview
GV-200 - Video Walkman
Brand: Sony Pages: 18
Sony Handycam HDR-CX11E Operating Manual preview
Handycam HDR-CX11E
Brand: Sony Pages: 36

Brands by name

Popular brands

Load more brands