Dedicated Micros ©2007
SD Range
Cameras
This page allows the connected cameras to be configured.
Camera
This column shows all the cameras that are currently connected
and can be edited.
Title
Each of the camera titles can be edited to describe the camera
location or view. On the Local monitor, Press OK on the item to
edit and display a virtual keyboard. When using the remote web
pages, utilise the PC keyboard to enter text.
Note:
If a camera title is entered via the local monitor, an on-screen virtual keyboard will be
displayed to aid text entry.
Telemetry
If a Dome or PTZ camera is used; the appropriate control protocol
should be selected.
Advanced (Green)
Opens the Advanced Setup page (see overleaf).
Serial (Yellow)
Opens the Serial Settings page (refer to Serial section of this
manual). The Serial page is used to define which serial port is
used to connect telemetry cameras.
Cancel (Purple)
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
More/Back (Blue)
Only eight cameras can be displayed on the local monitor. If
required, access additional camera settings via the More button.
Return to the previous page via the Back button. These buttons
are only displayed if more than eight cameras are connected.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
Note:
Any changes made on the web pages are automatically saved when the page is closed.
To ‘manually’ save changes, select the Save button. Use the ‘Cancel’ button to exit a page
without saving any changes made.
Note:
The Save button is only displayed when accessing the menus via the web interface.
