Dedicated Micros ©2007
SD Range
Schedule
The SD DVR recording quality is controlled by three factors; the time of day, the quality of image that
has been set to record during that time, and whether the unit is in alarm. These factors combine to
produce a recording profile. Each of these parameters can be adjusted individually. The schedule
configuration can also be used to determine when the alarm contacts are active on the unit.
This page allows the schedule settings on the unit to be edited.
Enable
The schedule can quickly be enabled or disabled by ticking the
accompanying textbox of the options outlined below.
Mode
This lists the three available modes that can be used when setting
camera schedules.
Night
Select to establish start and end times for Night schedule settings.
Weekend
Select to establish start day/time and end day/time for Weekend
schedule settings.
Start
These text boxes control what time the Day and Night profiles will
become active. During the Day period, the camera settings for
‘Day’ will be active
(refer to Recording - Advanced)
.
End/Day
These text boxes control what time the Day and Night profiles will
become inactive.
Keyswitch
A Keyswitch can be used to switch from Night profile to Day, or to
disable the alarms. It can be attached via the Alarms connector
using
alarm in 17.
Note:
Use of a Keyswitch precludes the use of schedules.
Cancel (Purple)
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
