Dedicated Micros ©2007
SD Range
Recording
The SD has a range of pre-defined configurations available As standard the unit can record at 5pps
MPEG4 and at a duration of 7, 14, 30 or 60 days (the default is 14 days). Alternatively the unit
can be configured for 1pps JPEG recording on each camera or can be configured for
Multi
Mode
operation so that it switches from 5pps MPEG to 5pps JPEG on Event (Note that this will result in
the record duration being determined by the amount of time the unit is in alarm). The Apply button
updates the system record duration calculator which calculates the actual duration capable of being
held on the drive. If specific requirements are needed on a camera, the Advanced configuration can
be used to configure the exact requirement.
Record duration
This text box will display the record duration possible using the
current configuration.
Preset configuration
Select the rate of non alarm recording to be used from the range
of preset recording profiles; via Normal, Medium and Low Rate
options utilising MPEG4, JPEG or
Multi
Mode
recording.
Record duration/enhance quality The recording duration can be limited to 7, 14, 30 or 60 days;
allowing the machine to enhance the recording quality to suit.
Apply? (Green)
If the settings have been changed then Apply will configure these
and override any individual settings. The Record calculator will
then update.
Advanced (Red)
This button opens the Advanced Setting page
(see later)
.
Record options (Yellow)
This button opens the Record options page
(see later)
.
Cancel
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
