Dedicated Micros ©2007
SD Range
Bandwidth Selection
Type
This option ensures the speed of the data from the unit matches
the speed of the network the data is being transmitted across.
These are default settings and are configured as:
LAN – 10000 Kilobits/second
WAN – 256 Kilobits/second
ISDN – 64 Kilobits/second
Max Transmission Rate
This shows the maximum transmission speed for the type of
network selected.
Tx image buffers
This is used in order to improve the picture delivery over Ethernet
when using a slow connection, i.e. 256Kbps. Options available
are 1, 2 or 3 buffers.
Ethernet MTU
This is the maximum transmit unit for the Ethernet packet. The
MTU is the largest physical packet size measured in bytes,
that the network can transmit. By default this figure is set to
1500bytes.
Ethernet rx-tx t/o (ms)
This is the time the unit will wait to re-send a packet if an
acknowledgement is not received.
When making a connection across a WAN link this figure should
be increased and should match the timeout figure for the router.
Network (Red)
This button will open the Network page
(see Network)
.
Cancel (Purple)
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
