Dedicated Micros ©2007
SD Range
To display images in multiscreen format, press the yellow softkey to display two further menus:
To change the camera in a specific segment of a multiscreen:
Select ‘Segment’, this will display a flashing ‘+’ symbol in the first segment on the screen. Sequence
through the segments by pressing the OK button. When the segment that requires changing is
displayed, enter the camera number (2 digits) or use the CH +/- keys. The selected camera is then
shown. To exit Segment, press the colour keys and then press the Blue Segment button again.
To select a Sequence
Select a sequence by pressing a coloured Softkey, the following menu will be displayed:
Press the Next button and the following menu will be displayed
Press the sequence key and a sequence will start on the main monitor. The dwell time for the
sequence can be adjusted in the Display menu. The sequence will display all cameras that are
available and not assigned as hidden cameras.
To control a spot monitor
To control a spot monitor press the MONITOR key on the remote or keyboard. The status display will
show SPOT on the main monitor. Any camera selections or Sequence selections will now apply to
the spot monitor. Note: The spot monitor is only capable of displaying live full screen images.
To Copy cameras to an archive
Refer to the Copy Menu section of this manual.
To Investigate events
Refer to the Event List section of this manual.
