Dedicated Micros ©2007
1
SD Range
Using the Copy option within Event list
Within the Event list it is possible to highlight an event and send to the Copy List.
1. Press the EVENT button to display the Event list screen.
2. Use the Up/Down Directional buttons to highlight the event to be copied.
3. Press the COPY button, the event is then sent to the Copy List.
To Copy Events/Images to CD
1. Insert a blank CDR into the CD drive of the unit.
2. Select CD from the Media textbox.
3. Select the Copy option (Red) to start archive.
4. Selected items are then saved to disc. Please note that if the CD is not ready or is not
empty, ‘status’ will be displayed on screen. Whilst data is writing to CD, the following
status information will be displayed on screen:
Please Wait
Watermarking
LeadIn
Writing
Verifying
5. On completion the CD will be ejected from the unit.
To Copy Events/Images to a USB Device
1. Insert a USB Device into the USB port on the front of the SD unit.
2. Select USB from the Media textbox.
3 Select the Copy option (Red) to start archive.
4. Selected items are then saved to the USB device.
5. The USB export status is displayed as a %. On completion the status will read
‘Finished’.
Note:
The SD range will support most USB Flash and USB HDD media for export, a summary of
known supported items is displayed in Appendix C.
Selecting/Deselecting Copy items
1. To clear copy list, press Clear button
2. To delete individual items from copy list, select items to be deleted by selecting them
and pressing OK. Check all items to be removed and choose Delete (blue softkey)
