6.2.3
Setting the domestic hot water temperature
Important
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
1. Access the domestic hot water production parameters by pressing the
key .
2. Modify the domestic hot water set point by pressing the or key.
Important
Press the
h
key to cancel all input.
3. Confirm the new temperature set point by pressing the
key.
Go back to the main display by pressing the
h
key.
6.2.4
Activating Forcing of the cooling function
Important
The cooling function can be managed via the PROG COOL sub-
menu dedicated to timer programming.
Important
The flow temperature set point for the cooling mode corresponds
to the parameters or depending on the
type of circuit configured (underfloor heating, convection fan). The
parameters or are available in the
Installer menu.
1. Access Forcing of the cooling function by pressing the
key.
Important
Forcing of the cooling function is possible only if the Installer
enabled the cooling function during Installation.
2. Open Forcing of the cooling function by pressing the
key.
3. Activate Forcing of the cooling function by pressing the key.
Fig.41
MW-6000254-2
Fig.42
MW-5000401-2
Fig.43
MW-5000402-2
Fig.44
MW-5000403-2
6 Settings
7613346 - v05 - 13112018
200 ESL HYBRID
39
