2.1.4.
Choose a location
Choose a location in a "reference" room
representative of the room
temperature to be taken into account if the remote control is used as a
room sensor.
Locations in the room that are not recommanded
:
Enclosed, exposed to solar radiation, heated by a flue duct, exposed to
cold or hot air currents from air ducts, close to an open fireplace, a heat
source (television), behind a curtain.
Choose an location which allows good radio reception
:
1. Check that the boiler is switched on.
2. Press the
MODE
and
r
keys simultaneously for 5 seconds. The
0
menu is displayed.
3. After a few seconds, the reception level is displayed on the right of
the display.
0
: Weakest reception level
10
: Strongest reception level
4. Choose a location for the remote control for which the radio
reception level displayed is higher than
8
.
4
Reception problems may occur, depending on the
construction materials used in the house (thickness of
walls or floors, type of materials used).
4
A hand may interfere with reception.
5. To go back to the main display, press the
MODE
key or wait 2
minutes.
2.1.5.
Installing the remote control
1. Drill 2 holes with a Ø of 6 mm.
2. Put the plugs in place.
3. Tighten the 2 screws.
200
1500
8800N036-B
A000857-A
5"
+
MODE
r
C002586-B
MODE
r
x
2
4
5
6
7
0
2
4
6
8
10
12
14
16
18
22
24
20
c
1
3
C002588-A
1
3
2
2. Installation
CDR4 - Package AD253 - Package AD284
38
23/06/2011 - 300020530-001-C
EN
Summary of Contents for AD253
