background image

3.1.6.

Selecting a timer programme

1. Press the 

MODE

 key several times until the symbol 

AUTO

 is

underlined.

2. To select the desired timer programme (P1, P2, P3 or P4), turn the

rotary button.

3. To confirm, press the rotary button.

3.1.7.

Forcing domestic hot water production

4

For temporary domestic hot water production lasting 1 hour, press

the key 

r

. The line underlining the symbol 

r

 flashes.

4

For permanent domestic hot water production, press the key 

r

 for

5 seconds. The line underlining the symbol 

r

 is steady.

To cancel the override, press the key 

r

. The line underlining the symbol

r

 is no longer displayed.

3.2

Extended use of the appliance

3.2.1.

Setting the time and date

1. Press the 

MODE

 and 

r

 keys simultaneously for 2 seconds. The

time is displayed.

2. Press the rotary button.
3.

The minutes flash.

To modify the minutes, turn the rotary button.

To confirm, press the rotary button.

4.

The hours flash.

To modify the hours, turn the rotary button.

To confirm, press the rotary button.

5.

The number of the day flashes.

To modify the day (1 = Monday, 2 = Tuesday, etc.), turn the rotary

button.

To confirm, press the rotary button.

6. To return to the principal display, press the 

MODE

 key or wait 20

seconds.

To go back to the previous display, press the key 

r

.

C002392-C

MODE

r

AUTO

x

1

4

5

6

7

0

2

4

6

8

10

12

14

16

18

22

24

20

c

2

ÿ

AUTO

3

C002397-E

MODE

r

r

b

AUTO

x

0

2

4

6

8

10

12

14

16

18

22

24

20

°C

c

A000858-A

2"

+

MODE

r

A000853-A

MODE

r

x

0

2

4

6

8

10

12

14

16

18

22

24

20

c

1x

1

2

3

4

5

6

7

ÿ

AD254 - AD285

3. Operating instructions

27/06/2012  - 300020537-001-02

37

EN

Summary of Contents for AD254















Reviews: