5 Operation
5.1 Use of the control panel
5.1.1 Browsing in the menus
Note
The first time a key is pressed, the backlit screen is switched on.
The name of the PCB is displayed: check that it is actually the
PCB on which the setting must be made.
1. To access the menu level, press the two keys on the right simultane
ously.
2. To go back to the main display, press the
h
key.
3. Note
The key is used to move to the right.
Note
The key is used to move to the left.
To select the desired menu, press the or key until the icon for
the desired menu flashes.
Information menu
User menu
Installer menu
Forcing Manual mode
Failure menu
Hour run meters sub-menu
Timer Program sub-menu
Clock sub-menu
The icon is displayed only if an optional PCB has
been installed
Fig.17 Accessing the menus
MW-5000009-3
Fig.18 Choosing the menu
MW-5000018-3
Fig.19 Choosing the menu
MW-3000248-2
5 Operation
28
MIV-4
7623755 - v02 - 03072015