6.2.3 Setting the heating
Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the heating shut-down pressing the key twice.
Note
If no outside temperature sensor is connected, this menu can be
used to set the temperature of the heating water.
If an outside temperature sensor is connected, this menu can be
used to set the set point.
2. Display the parameters for the desired circuit by pressing the or
key. Confirm by pressing the
key.
The name of the circuit and the heating water temperature set point
are displayed alternately.
3. Access setting of the heating water temperature set point by press
ing the
key.
4. Set the heating water temperature set point by pressing or key.
5. Confirm the new temperature set point by pressing the
key.
Note
Press the
h
key to cancel all input.
6.2.4 Setting the domestic hot water temperature
Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the domestic hot water production parameters by pressing
the
key twice.
Fig.38 Accessing the heating parameters
MW-5000144-1
Fig.39 Confirming the heating circuit
MW-3000249-2
Fig.40 Accessing the domestic hot water
production parameters
MW-6000254-1
6 Settings
7623755 - v02 - 03072015
MIV-4
39
