- 23 -
GB
7 / MAINTENANCE
Before any maintenance, disconnect the apparatus and leave it to
cool.
The fryer can be completely dismantled (proceed in the reverse
order to that for assembly). All the pieces may be simply
maintained. A « drainer » position has been devised, to permit the
heating element to be secured during cleaning.
Aluminium hinge:
The aluminium hinge which permits the turning of the element
during maintenance is fitted with a stainless steel securing bolt.
This piece runs to the right and secures the element, which is held
“suspended” above the bowl during the time necessary for
disposing of the fat..
The 3
possible positions of the heating element
are the
following:
1) position for use
2) position for draining
3) position for removing the bowl
