38
Installing your hob in all simplicity
G
as connections (Cont'd)
●
Possible connections
B
O T T L E D O R T A N K E D G A S
(
B U T A N E
/
PROPANE
).
For the user's safety, we advise the
connection to be made with a rigid
pipe if this is possible, or with a
reinforced, braided, flexible gas hose
(maximum length 2 metres)
(fig. A)
.
For an existing installation,
where
it is not possible to fit a reinforced,
braided, flexible gas hose, the
connection can be made with a
flexible gas hose (maximum length 2
metres),
with two jubilee clips
: one
on the connector
(fig. B)
, and the
other on the pressure regulator, and a
seal should be fitted
between the connector and the elbow
seal on the hob.
You will find the seal and the adaptor
in the wallet delivered
with the unit.
BUTANE/PROPANE
Pressure regulator compulsory
propane
butane
ne
propane
Temperatures above 30°C would cause overheating of the gas hose. To
avoid this, check that there are no heat-producing devices nearby.
Screw on the connector with a torque not exceeding 2.5 m/daN (m/kgF).
In France, you must use a hose or a pipe bearing the stamp NF Gaz.
Seal
(not provided)
Jubilee clip
(not provided)
Jubilee clip
(not provided)
;
;
@
@
;
;
Q
Q
fig. A
fig. B
Reinforced,
braided, flexible
gas hose with
threaded
connectors
Flexible hose
connection
propane
99643032_A_ML_FR-EN.qxp 21/08/2007 14:19 Page 38
