5.3.1
Transport
Important
We recommend shipping the appliance vertically.
It is possible to transport the appliance horizontally over short distances
and only whilst resting on its rear panel.
Caution
It is prohibited to stack or set down the appliance any of its other
sides, as this may lead to malfunctions or faults.
5.4
Choice of the location
5.4.1
Data plate
The data plate must be accessible at all times.
The data plate identifies the product and provides the following
information:
Appliance type
Date of manufacture (Year - Week)
Serial number
5.4.2
Position of the appliance
Caution
When installing the appliance, comply with the IP21 protection
rating.
Caution
Do not install the thermodynamic water heater in premises
exposed to gas, vapours or dust.
The appliance should not take in air containing solvents or
explosive substances.
The air taken in must in no circumstances be dusty.
Adequate thermal insulation in relation to adjacent living spaces
is recommended.
Temperature of the ambient air or of the air taken in by the heat
pump for optimum running: 10 to 35 °C.
Install the appliance in a dry, frost-free room at a minimum temperature
of 7 °C.
Install the appliance on a flat, solid surface.
Install the appliance on a base frame. The base frame must be able to
support the load sufficiently at all times.
Fig.5
MW-1000371-1
Fig.6
MW
-1
0
0
0
3
6
4
-1
5 Installation
300026515 - v10 - 28082018
19
