4
11/2010 - 300003201-001- F
M 300 S
Security Measures
• Installation must be carried out in accordance with current laws.
• Current safety and accident prevention regulations must be respected at all times.
• Burner assembly, start up, operation and maintenance (inspection, servicing, repair) must be carried out by qualified, properly trained
personnel.
• Only the manufacturer is authorised to undertake repair work on the electrotechnical parts, flame detection devices and other safety
equipment.
• Changes and modifications not specified in this document and which may cause serious malfunction to the burner are prohibited..
•
All work, except for adjusting the burner, shall only be carried out after the burner has stopped and after the power supply has
been disconnected
.
• We shall not accept any responsibility for any damage and disturbance arising from not following these instructions !
The flame tube temperature is high. The baffle temperature is high. Handle with care.
Important information
Handing over the system to the user
• When the system is being handed over to the user, the installation engineer shall draw particular attention to the actions that the user is
authorised to carry out (when the burner is on safety for commissioning the system) and to the actions and modifications that may only be
undertaken by qualified personnel.
• The user must ensure that only a qualified professional has maintained the burner.
• This document is an integral part of the burner. Please keep it carefully in the furnace room near to the appliance.
Installation maintenance
To get the most out of your burner and to avoid operating difficulties, make a a qualified technician carries out the following:
• Cleaning the combustion head.
• Replacing the fuel oil nozzle.
• Replacing the electrodes (If necessary).
• Checking the burner's operation.
• Checking and cleaning the boiler.
• Checking and cleaning the chimney.
• Checking and cleaning the new air heater input.
For wearing parts, see the list of spare parts at the end of these instructions.
Used symbols
Caution danger !
Risk of injury and damage to equipment.
Attention must be paid to the warnings on safety of persons and equipment.
Specific information. Information must be kept in mind to maintain comfort.
,
,
Assembly stage
1
,
2
,
3
Markers
