Important
The Smart TC° uses the set country for the selection of the current
time zone, when connected to the internet.
4.2.3
Main screen setting
You can add two information boxes on the main screen, one to the left and
one to the right of the rotary dial.
1. Enter the main menu.
2. Select Settings.
3. Select the submenu Mainscreen settings.
4. Use the rotary dial to select the left information box.
5. Select one of the options.
6. Confirm the selection.
7. Use the rotary dial to select the right information box.
8. Select one of the options.
9. Confirm the selection.
Important
You can short-press the home button to go back one step.
4.2.4
Presence sensor
The Smart TC° has a sensor for presence detection. When you pass by or
approach the Smart TC°, the main screen of the display will light up for 5
seconds. This setting is on by default.
You can switch off the presence detection.
1. Enter the main menu.
2. Select Settings.
3. Select the submenu Presence sensor detection.
4. Select Off.
5. Confirm the selection.
Important
With the presence sensor switched off you need to press a
button or turn the rotary dial to activate the display. The main
screen of the display will light up for 30 seconds.
Set Presence sensor detection to On to activate the presence
sensor again.
4.2.5
Display current or target temperature
The Smart TC° displays the current temperature in a large font by default.
The target temperature is in a small font near the temperature scale.
You can change the display of the temperature to show the target
temperature in large font and the current temperature in a small font.
1. Enter the main menu.
2. Select Settings.
3. Select the submenu Display current or target temperature.
4. Select Current Temperature or Target Temperature.
5. Confirm the selection.
This setting will stay until you change this setting again or reset the Smart
TC° to factory settings.
Important
The instructions in this manual are based on the default setting for
current temperature. Changing the display of the temperature
influences the instructions given.
Fig.33
AD-3001006-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
..
.
|
..
.
}
<1
Fig.34
AD-3001007-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
<1
Fig.35
AD-3001010-01
}
..
.
..
.
21.0
°C
<1
4 Customisation
7720691 - v.01 - 05102018
23
