2
6
(12’ screen pictured, not all screens are same proportions. For illustration purposes only )
INFLATABLE SCREEN SETUP
STEP 1: UNROLL SCREEN AND UNCOIL TETHERS
Unroll screen on grass or tarp. Unfold the screen so it sits like a
clamshell with the white projection surface on the inside (so it
doesn’t touch the ground). Identify the top and bottom of the
screen. The bottom of the screen has the air intake for the air
blower. Be sure ground is smooth, level and free of glass, rocks or
other debris.
Uncoil white tethers from four corners of screen, top and bottom.
Screen should be at least 10’ away from structures and objects such
as fences, buildings, trees, overhead branches, power lines, electrical
wires, walls, etc. Choose a location where no direct light will hit the
screen.
ATTENTION: Do not drag screen across concrete, pavement or
other rough surfaces.
Properly unfolded screen
Uncoiled white tethers
Rear side of screen
Front side of screen with white
projection surface inside of
clamshell like form
Preview of what screen will
look like when properly inflated.
Notice how there are two tethers
attached to each corner of the
screen, front and back. Do not
inflate yet.
