8
STEP 6: SYSTEM TAKEDOWN
PROJECTOR
Power down the projector; press power button and follow instructions to allow projector bulb
to cool down BEFORE unplugging.
Failure to do so could result in bulb damage and
replacement fees.
SPEAKERS
Turn all volume knobs down on speakers and turn to OFF position before unplugging cables.
SCREEN
Turn off air blower and guide screen down so that it unfolds in half (top to bottom, as shown in
screen setup).
Unzip air vent and disconnect the intake sleeve from air blower.
Unclip or untie tethers from stakes.
Remove stakes from ground and clean off debris / dirt with a rag.
Fold screen from back to front a few times until it is in a long strip about 2 feet wide. Roll
tightly and place in travel bag.
NOTE: PREVENT SCREEN SURFACE FROM TOUCHING THE GROUND. DO NOT PACK IF
SCREEN IS WET. HANG INDOORS IF NECESSARY, TO DRY SCREEN BEFORE STORAGE.
