AUTOMATED SAFETY SWITCH
The unit is equipped with a safety cut-out to protect
the appliance from overheating. Below are the steps
needed to reactivate the appliance in the case the
unit turns off:
1. Let the unit cool for 30 minutes.
2. Press the reset button located at the back of the
electric box. See image below.
ASSEMBLING THE UNIT
1. Place the inner bowl inside the unit.
2. Slide the electric box into the guide rails.
3. The frying basket will go on top of the inner bowl in
the unit.
4. Place the handle on the basket by squeezing the
two prongs together. Slide them into the two holes
inside on the basket. Make sure that the prongs
and holes match up, and then release. Next, pull
the handle back to latch it into place around the
loop at the top of the basket.
5
