Specifications
057-179 ISSUE: 3
Page 10 of 50
3.7 ETHERNET CONNECTOR
The DSE892 Gateway module is fitted with an autosensing ethernet socket.
This can be utilised in a number of ways.
See section entitled “Typical Connection to DSE controllers”,
subsection
” Via Ethernet” for further details.
10baseT/100baseT
Pin
Connection 1 (T568A)
Connection 2 (T568A)
1
white/green
stripe
white/green
stripe
2
green solid
green solid
3
white/orange
stripe
white/orange
stripe
4
blue solid
blue solid
5
white/blue
stripe
white/blue stripe
6
orange solid
orange solid
7
white/brown
stripe
white/brown
stripe
8
brown solid
brown solid
NOTE: DSE Stock a 2m (2yds) Ethernet Cable
– Part number 016-137. Alternatively they
can be purchased from any good PC or IT store.
As the Gateway is autosensing, either a ‘straight through’ or ‘crossover’ cable can be used.
The diagram above shows a ‘straight though’ cable.
For the advanced
Engineer, this cable
has both ends
terminated as T568A
(as shown below) or
T568B.