Connecting to the Gateway Management Pages
Page 25 of 50
057-179 ISSUE: 3
7.2 CONFIGURATION
Ensure you consult with the IT/Network manager of the site that the DSE892 is connected to before
making any changes to these settings.
7.2.1 NETWORK
Parameter
Description
DHCP Enabled
= The Gateway requests network settings from a DHCP server.
=
The Gateway’s network settings must be entered manually.
DHCP is usually only chosen when the DHCP server is configured to
bind
a
specific IP address to the MAC Address of the DSE892. This allows the SNMP
manager to be easily configured with the IP address of the DSE892.
Static IP
(Factory setting 192.168.1.100)
Subnet mask
(Factory setting 255.255.255.0)
Gateway IP
IP address of the internet router that the DSE892 is connected to.
DNS IP
IP address of the Domain Name Service. Usually this is the same as the
Gateway IP.
Hostname
Hostname of the device. Used to identify the Gateway on the network. Give
this a meaningful name to assist the network IT manager to recognise the
device on the network!
WebConfig Port
The port number that these configuration pages are served on.