®
DEEPSEA
Power & Light
®
4033 Ruffin Rd
San Diego, CA 92123
ph: (858) 576-1261
www.deepsea.com
info@deepsea.com
fax: (858)576-0219
The revolutionary LED Multi-SeaLite® from DeepSea Power & Light will
change the way you look at underwater lighting. Gone are the days of down
-
time caused by lamp changes. LED Multi-SeaLites® have a 50,000 hour
lifespan, and are incredibly shock and vibration resistant. The LED Multi-
SeaLite’s® high color temperature white LEDs, variety of monochromatic
colored LEDs, and state of the art reflectors give you the ability to put light
where you need it and reduce wasted light that is often experienced as back
-
scatter. DeepSea’s proprietary driver circuitry and high efficiency LEDs com
-
bine to create a fixture that produces over five times more light per watt than
comparable halogen lamps. To top it all off, you can easily convert your cur
-
rent suite of Midwater or Deep Multi-SeaLites® to LED Multi-SeaLites®, using
the same bodies, mounts, and connectors that you keep in your spares kit.
mEchanicaL
Body Material
Hard Anodized Aluminum (6061)
Window Material
Acrylic
Mounts
High Strength Plastic Mounting Collar (standard)
Stainless Steel Yoke Mounting Bracket (optional)
Helmet Mounting Bracket (optional)
Air Weight
896g (31.6oz)
Water Weight
420g (14.8 oz)
Implodible Volume
57cc (3.5 ci)
EnVirOnmEnTaL
Depth Rating
6,000m (20,000ft)
Test Pressure
10,000 psi
Crush Depth*
9,700m (31,000ft)
Min/Max Operation Temp.
-10°C to 40°C (14° to 104°F)
OPTicaL
Colors
White
Blue
Green
Lumens in the Water**
2400 lumens
TBD
TBD
Color Temp
5500°K
n/a
n/a
Dominant Wavelength***
n/a
475nm
525nm
Beam Pattern****
Medium: 30°
ELEcTricaL
Input Voltage
85 - 135v AC (100 - 180v DC)
185 - 265v AC(200 - 300vDC)
10-32v DC (0-5vdc analog dimming)
Current Draw
550ma @ 120v AC
True Power
44w
Power Factor
0.66
Dimming
0%-100% via 0v-5v control loop on LV option only
LED Lifespan
50,000 hours
*Crush depth is based on one sample only.
**True amount of light leaving the fixture, as measured with a calibrated integrating sphere. (calibration traceable to NIST)
***Dominant wavelength of monochromatic light.
****Beam angle measured to full width half power.
BH3MP
(1=Hot, 2=Neutral, 3=Ground to shell)
BH5MP
Used in LV dimming option only
(1=Pos, 2=Neg, 3=Ground to shell,
4=Not used, 5=Pos 0-5vdc control)
(Note: 0-5vdc control ground to pin 2)
LPBH3MP
(1=Hot, 2=Neutral, 3=Ground to shell)
XSG3BCL
(1=Ground to shell, 2=Neutral, 3=Hot)
1503
(1=Hot, 2=Neutral, 3=Ground to shell)
LED Multi-SeaLite
®
SPEC REV A 10/28/10
